Recording From Tuner; Recording From Line Input - Onkyo BR-925 Instruction Manual

Recording (Transferring Data)—Continued

Recording from Tuner

You can record broadcasting program.
1
Switch the input source.
Press the [BAND] button to select FM or
AM. You can also use the [INPUT
SELECTOR] button to select the input
source.
2
Tune into the radio stations.
See "Tuning into AM/FM Radio Sta-
tions" on page 32 and "Selecting Preset
Stations" on page 36.
3
Press the [
to the destination of recording.
or
When recording onto the HDD, press the
HDD REC [
ing into a USB device, press the USB
REC [
4
Start recording.
Press the Play [
or
(The above is an example when the HDD
REC [
5 Press the Stop [ ] button to can-
cel the recording.
"Complete!" will be displayed, and the
recording ends.
To pause recording, press the Pause [ ]
button. To resume recording, press it
again.
Tip:
The title of the recorded program is automatically consists
of date, start time of recording, radio station name (its band
and frequency if it is not preset).
50
] button according
Ready?
] button. When record-
] button.
] button or [ENTER].
00:00:25
FM 76.50MHz
20080820_0034
] button is pressed.)
Complete!

Recording from Line Input

You can record audio from external components con-
nected to LINE1, LINE2, or LINE3. You can't record
audio from external components connected to DIGITAL
OPTICAL IN.
1
Switch the input source.
Press the INPUT [ ]/[ ] buttons to
select LINE1, LINE2, or LINE3. You
can also use the CD/HDD receiver's
[INPUT SELECTOR] button to select
the input source.
2 Press the [
to the destination of recording.
When recording onto the HDD, press the
HDD REC [
ing into a USB device, press the USB
or
REC [
3 Start the playback of the recording
source.
When recording from a
component, the CD/HDD receiver auto-
matically starts recording. Otherwise,
or
first press the Start [
[ENTER] and then start the playback of
the external component.
4
Press the Stop [ ] button to can-
cel the recording.
"Complete!" will be displayed, and the
recording ends.
During the recording from the
ble components, if the playback is
paused or stopped, the CD/HDD receiver
switches to the recording standby mode.
Pressing the button again resumes the
recording.
Tip:
The title of the recorded sound is automatically consists of
date, start time of recording, input source name (if the input
source name has been changed in the steps on page 45, the
changed name is used).
] button according
] button. When record-
] button.
-capable
] button or
00:00:13
LINE
20080820_0035
-capa-