Component Video Setup; Minimum Speaker Impedance - Onkyo TX-SR653E Instruction Manual

First Time Setup—Continued

Component Video Setup

If you connect to a COMPONENT VIDEO IN, you must
assign it to an input selector. For example, if you connect
your DVD player to COMPONENT IN 3, you should
assign it to the DVD input selector.
If you want to output composite and S-Video sources
from the COMPONENT VIDEO OUT, select VIDEO,
as explained below.
Input selector
DVD
VIDEO 1
VIDEO 2
VIDEO 3
VIDEO 4
1
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
RECEIVER
The main menu appears onscreen.
2
Use the Up and Down [
buttons to select "0. Initial
Setup," and then press [ENTER].
ENTER
The Initial Setup menu appears.
ENTER
3
Use the Up and Down [
buttons to select an input selec-
tor, and then use the Left and
ENTER
Right [
IN1: Use the video component
IN2: Use the video component
IN3: Use the video component
VIDEO IN jack
IN 1
IN 2
IN 3
VIDEO
VIDEO
]/[ ]
]/[ ]
]/[ ] buttons to select:
connected to COMPO-
NENT VIDEO IN 1.
connected to COMPO-
NENT VIDEO IN 2.
connected to COMPO-
NENT VIDEO IN 3.
VIDEO: Output composite video
4
Press the [SETUP] button.
The setup menu closes.
Note:
This procedure can also be performed on the AV receiver
by using its [SETUP] button, arrow buttons, and
[ENTER] button.

Minimum Speaker Impedance

This setting is not set automatically by the Automatic
Speaker Setup function (see page 38).
If the impedance of any of the connected speakers is 4
ohms or more, but less than 6 ohms, set the Minimum
Speaker Impedance to "4 ohms."
Note:
Before you change this setting, turn down the volume.
4 5
CD TAPE
7 8
+ 10
0
10 11
--/---
INPUT SELECTOR
MACRO
1 2
REMOTE MODE
1
RECEIVER DVD
TAPE/AMP
TV VCR
DIMMER
2
+
CH
DISC ENTER
ALBUM
-
PREV
CH
DISPLAY
REC PLAYLIST
LISTENING MODE
STEREO SURR
REPEAT AUDIO SUBTITLE
DIRECT
and S-Video sources from
the COMPONENT
VIDEO OUT.
6 -
TUNER
9
T V VOL
CLEAR
12
3
ZONE2
CD HDD
CABLE SAT
CDR MD
SLEEP
2, 3
VOL
1, 4
MUTING
RANDOM
PLAY MODE
ALLST
43