Disconnecting The Camera From The Computer - Olympus Studio Instruction Manual

Disconnecting the camera from the
computer
If you operated OLYMPUS Studio with the camera connected to the computer,
disconnect the camera from the computer when you are finished using OLYMPUS
Studio.
1
Confirm that the card access lamp on the camera is not flashing.
2
Use the Remove Hardware function.
Perform the following depending on your OS.
Macintosh
Drag the [NO_NAME] icon (in Mac OS X) or [untitled] icon (in Mac OS 9) on the
desktop to the Trash.
Before removing the connection cable, be sure that the card access lamp on the
camera is not flashing.
Windows Me/2000/XP
Click the Remove Hardware icon displayed on the taskbar at the bottom right of
the computer screen and select the displayed message.
• When you click the Remove Hardware icon, the warning message "Cannot stop
the camera" may appear. If this occurs, confirm that image data is not being
transferred from the camera and then remove the USB cable.
Windows 98 SE
Right-click [Removable Disk] in My Computer and select [Eject].
Before removing the connection cable, be sure that the card access lamp on the
camera is not flashing.
3
Remove the USB or IEEE1394 (FireWire) cable from the camera.
28