Noise Reduction - Olympus Studio Instruction Manual

Noise Reduction

This function reduces image noise. Batch processing can be used to reduce noise
in several images at the same time.
1
Click the [Noise Reduction] button on the image processing bar
or select [Noise Reduction] from the [Image] menu.
The [Noise Reduction] palette appears.
[Noise Reduction] palette
Item
Apply
Auto
Manual
2
Configure each item.
3
Confirm that [Apply] is checked.
When the settings on the palette are changed, [Apply] is automatically checked
and the settings are applied to the image.
4
Click the [Noise Reduction] button on the image processing bar
or select [Noise Reduction] from the [Image] menu to close the
[Noise Reduction] palette.
Check this box to apply the settings to the image.
Uncheck this box to cancel the settings.
Image noise is reduced automatically.
You can manually adjust the noise reduction level by dragging
the slider to the left or right. The noise reduction level can be
set from [0] to [100]. You can click
increments of 10. You can also directly enter the noise
reduction level.
Editing images
Description
or to set the level in
161