Olympus Studio Instruction Manual page 221

1
Click the [File Naming Rule] button.
The [File Naming Rule] dialog box appears.
[File Naming Rule] dialog box
Item
(separator characters) Enter separator characters for each block. If nothing is
(Optional string setting
box)
(Shooting date setting
box)
(Shooting date/time
setting box)
Digits
[Cancel]
[OK]
2
Configure the naming rule.
Configure the [Prefix], [Base], and [Suffix] blocks of the naming rule.
If [Optional String] is selected, enter the optional string in the box displayed at the
bottom or select the optional string from the pull-down list.
If [Shooting Date] or [Shooting Date & Time] is selected, select from the pull-down
list displayed at the bottom.
If [Serial Number] is selected, select the number of digits.
Also, enter separator characters between the blocks as needed.
3
Click the [OK] button.
The naming rule is set.
entered, no separator characters will be used.
Displayed when [Optional String] is selected for each
block. Enter a string or select a previously entered string
from the pull-down list.
Displayed when [Shooting Date] is selected for each
block. Select the shooting date format from the pull-down
list.
Displayed when [Shooting Date & Time] is selected for
each block. Select the shooting date/time format from the
pull-down list.
Displayed when [Serial Number] is selected for each
block. Enter the number of digits of the serial number. You
can enter up to four digits.
Cancels the setting of the naming rule.
Sets the naming convention for the image files.
Shooting images
Description
221