Fig. 10
Dispenser bottom view
10.3
10.1
10.2
7. Connect supplied 3/8" water line between water
supply and water inlet fitting (Fig. 10.1).
8. Using supplied 3/4" drain tubing and barbed fittings,
connect 3/4" barbed drain elbow fitting on dispenser
to 3/4" FNPT drain (Fig. 10.2).
9. Route power cord through utility access hole to
power supply (Fig. 10.3).
10. Turn on water supply and check for leaks.
F ig. 11
11. Install bottom panel (Fig. 11).
25CI400A/W • 25HI400A • 50CI400A/W • 50HI400A
9