Table of Contents
Advertisement
Section 3, Configuration
System Management
Terminal Timeout
Set the amount of time the terminal or Telnet session remains inactive before automatically closing the
session, requiring the a new login. The options include Disabled, 1 min., 5 min., 15 min., 60 min.,
or 1 day.
IP Security
Enable or disable the IP Security option. If Enabled, the unit accepts management commands and Telnet
sessions from the IP addresses entered into the IP Hosts fields.
IP Hosts
Enter up to 16 IP addresses of management stations from which the unit should accept management
commands. These addresses are only applicable if IP Security is Enabled.
Date and Time
Enter date and time information. Enter the month, date, and year separated by forward slashes (02/23/00).
Enter the time in military format separated by colons (13:15:25).
Miscellaneous
Categories available in the Miscellaneous subsection include the following:
•
Alarm Relay Configuration
•
Equipment Identification
•
Syslog Setup
on page 3-36
•
Auto Save
on page 3-36
•
Craft baud rate
on page 3-36
3-30
on page 3-31
on page 3-35
MX2800 STS-1 User Manual
61204659L1-1A
Advertisement
Table of Contents
