Configuration of the MX2800 STS-1 is accomplished via either the 10Base-T ethernet connection, a
SLIP/PPP modem port, or a VT-100 terminal.
3-2,
Figure
3-3, and
Figure 3-4
A Telnet menu session has priority over a terminal menu session through
the craft port. If a terminal menu session is active when a Telnet menu
session is initiated, the terminal menu session will be disabled until the
Telnet menu session is closed.
Detailed descriptions of the menu options shown in
•
Network Interface
on page 3-5
•
VT Interface
on page 3-9
•
System Management
•
Utilities
on page 3-37
•
Save Configuration and Alarm Log
61204659L1-1A
S
ECTION
Section 3
Configuration
Figure 3-1
show the menu tree.
Figure 3-1. Configuration Menu
on page 3-16
on page 3-43
3, C
ONFIGURATION
shows the Configuration menu screen.
NOTE
Figure 3-1
are given in the following:
Figure
3-1