Figure 13-6 Menu 3.5 Wireless Lan Setup; Figure 13-7 Menu 3.5.2 Roaming Configuration; Table 13-4 Menu 3.5.2 Roaming Configuration - ZyXEL Communications ZyAIR G-500 User Manual

ZyAIR G-500 Wireless Access Point User's Guide
ESSID= Wireless
Hide ESSID= No
Channel ID= CH06 2437MHz
RTS Threshold= 2432
Frag. Threshold= 2432
WEP Encryption= 64-bit WEP
Default Key= 1
Key1= ********
Key2= ********
Key3= ********
Key4= ********
Authen. Method= Auto
Step 3. Move the cursor to the Edit Roaming Configuration field. Press [SPACE BAR] to select Yes
and then press [ENTER]. Menu 3.5.2 – Roaming Configuration displays as shown next.
The following table describes the fields in this menu.
FIELD
Active Press [SPACE BAR] and then [ENTER] to select Yes to enable roaming on the ZyAIR if you
have two or more ZyAIRs on the same subnet.
Port # Type the port number to communicate roaming information between access points. The port
number must be the same on all access points. The default is 16290. Make sure this port is
not used by other services.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to confirm or ESC to
cancel" to save your configuration or press [ESC] to cancel and go back to the previous screen.
13-8
Menu 3.5 - Wireless LAN Setup
Press ENTER to Confirm or ESC to Cancel:

Figure 13-6 Menu 3.5 Wireless LAN Setup

Menu 3.5.2 - Roaming Configuration
Active= Yes
Port #= 16290
Press ENTER to Confirm or ESC to Cancel:

Figure 13-7 Menu 3.5.2 Roaming Configuration

Table 13-4 Menu 3.5.2 Roaming Configuration

Edit MAC Address Filter= No
Edit Roaming Configuration= Yes
Preamble= Long
802.11 Mode= Mixed
Max. Frame Burst= 650
DESCRIPTION
LAN Setup