Table of Contents
Advertisement
ESSID= Wireless
Hide ESSID= No
Channel ID= CH06 2437MHz
RTS Threshold= 2432
Frag. Threshold= 2432
WEP Encryption= 64-bit WEP
Default Key= 1
Key1= ********
Key2= ********
Key3= ********
Key4= ********
Authen. Method= Auto
The following table describes the fields in this menu.
FIELD
ESSID
The ESSID (Extended Service Set IDentity) identifies the AP to which the
wireless stations associate. Wireless stations associating to the AP must
have the same ESSID. Enter a descriptive name of up to 32 printable 7-bit
ASCII characters.
Hide ESSID
Press [SPACE BAR] and select Yes to hide the ESSID in the outgoing data
frame so an intruder cannot obtain the ESSID through passive scanning.
Channel ID
Press [SPACE BAR] to select a channel. This allows you to set the operating
frequency/channel depending on your particular region.
RTS
Setting this attribute to zero turns on the RTS/CTS handshake. Enter a value
Threshold
between 0 and 2432.
Frag.
This is the maximum data fragment size that can be sent. Enter a value
Threshold
between 256 and 2432.
WEP
Select Disable to allow wireless stations to communicate with the access
Encryption
points without any data encryption.
Select 64-bit WEP or 128-bit WEP to enable data encryption.
LAN Setup
Menu 3.5 - Wireless LAN Setup
Press ENTER to Confirm or ESC to Cancel:
Figure 13-3 Menu 3.5 Wireless LAN Setup
Table 13-2 Menu 3.5 Wireless LAN Setup
DESCRIPTION
ZyAIR G-500 Wireless Access Point User's Guide
Edit MAC Address Filter= No
Edit Roaming Configuration=
Preamble= Long
802.11 Mode= Mixed
Max. Frame Burst= 650
EXMAPLE
Wireless
No
CH01
2412MHz
2432
2432
Disable
13-3
Advertisement
Table of Contents
