Zoom RhythmTrak RT-323 Operation Manual page 7

Quick Guide 3
Listening to Patterns
The RT-323 incorporates 400 preset read-only patterns which you can use as follows.
Playing a Pattern
1
Press the [PATTERN] key
Pattern name
2
Press the [ ] key
Measure Beat
Changing the Pattern
Press one of the [ ]/[ ] keys
12
The display shows the currently
selected pattern.
Playback of the currently selected
pattern starts.
Pressing one of the [ ]/[ ] keys
causes the pattern number to be
switched by one step up or down. If
"EMPTY" is shown on the display, the
pattern is empty and cannot be
played.
You can also use the [VALUE] dial
instead of the [ ]/[ ] keys to select
the pattern.
Changing the Tempo
While holding down the [TEMPO] key,
press one of the [ ]/[ ] keys
Current tempo
Stopping the Pattern
Press the [ ] key
Patterns and Tracks
A pattern of the RT-323 is a stored combination
Pattern
of two drum kits and one bass program. The
location for each individual drum kit or bass
Drum A track
program is called a track. Therefore a pattern of
the RT-323 consists of the drum A track, drum
B track, and the bass track. Drum tracks A and
Drum B track B each contain a specific drum kit and the bass
track contains a bass program.
The RT-323 contains 400 read-only patterns
Bass track
(000 - 399), and 100 read/write patterns (U00 -
U99).
While you hold down the [TEMPO] key,
the display shows the current tempo
(BPM). Pressing one of the [ ]/[ ]
keys shifts the tempo up or down in
0.1 BPM steps.
* BPM: Number of quarter
note beats per minute
You can also use the [VALUE] dial
instead of the [ ]/[ ] keys to select
the tempo.
13