Zoom RhythmTrak RT-323 Operation Manual page 44

Press the [ENTER] key, and use the [ ]/[ ] keys to select the setting item.
2
MIDIch: Set MIDI send/receive channel for drum A/drum B/bass separately.
CTRL: Enable/disable control change information send.
PRG: Enable/disable program change information send.
SYNC: Enable/disable MIDI send/receive of sync messages (MIDI clock etc.).
MIDI TR: Enable/disable output of data stored on MIDI track.
MIDI PC DRUM: Assign program change number to drum kit (00 - 127).
MIDI PC BAS: Assign program change number to bass program (00 - 54).
When the desired item is shown, use the [L]/[M] keys or the [VALUE] dial and other
3
controls to make the setting.
For detailed information on operation, see the sections on the various items.
When the setting is complete, press the [EXIT] key.
4
The unit returns to the condition of step 1. To return to pattern/song mode, press the
[PATTERN]/[SONG] key.
G
Set MIDI send/receive channel for each track (MIDIch)
This allows you to set the MIDI send/receive channel for the drum A, drum B, and bass tracks.
While the indication "MIDIch" is shown on the display, use the [L]/[M] keys to select the track for
which to set the MIDI channel. Then use the [VALUE] dial to select one of the following settings.
• 1 - 16: MIDI channel 1 - 16 (Default setting: DRUM A = 10, DRUM B = 11,
BASS = 9)
• OFF: Send/receive off
Track
MIDI messages such as note information, control change information, and program
change information will be sent and received in this channel.
86
Currently selected
item
Setting
G
Enable/disable control change information send (CTRL)
Determines whether the RT-323 sends control change information. While the indication "CTRL" is
shown on the display, use the keys or the [VALUE] dial to select "ON" (send enabled;
[L]/[M]
default setting) or "OFF" (send disabled).
Current setting
When control change send is enabled, operating the JAM slider causes control change information
to be output from the [MIDI OUT] jack.
Control change receive is always On. Even if this setting is Off, control change messages
sent to the [MIDI IN] jack from external equipment can be used to achieve the same effect
as moving the JAM slider, or to adjust volume and pitch for a specific track. (For details on
control change messages recognized by the RT-323, see the list at the end of this
manual.)
G
Enable/disable program change information send (PRG)
Determines whether the RT-323 sends program change information. While the indication "PRG" is
shown on the display, use the keys or the [VALUE] dial to select "ON" (send enabled;
[L]/[M]
default setting) or "OFF" (send disabled).
Current setting
When program change send is enabled, switching the drum kit/bass program at the RT-323 causes
program change information to be output from the [MIDI OUT] jack.
• Program change receive is always On. Even if this setting is Off, program change
messages sent to the [MIDI IN] jack from external equipment can be used to switch the
sound (drum kit/bass program) for a specific track.
• In the factory default condition, a separate program change number is assigned to each
drum kit/bass program. The program change number assignment can be changed if
desired ( ¡ p. 89).
G
Enable/disable MIDI send/receive of sync messages (SYNC)
Determines whether the RT-323 sends and receives MIDI sync messages. While the indication
"SYNC" is shown on the display, use the [L]/[M]
following settings.
• INT: When the RT-323 carries out playback, MIDI sync messages are sent (default setting).
This allows for example playing a MIDI sequencer in sync with the tempo of the RT-323.
keys or the [VALUE] dial to select one of the
87