Changing The Song Name - Zoom RhythmTrak RT-323 Operation Manual

To delete, press the [ENTER] key. To cancel the process, press the [EXIT] key.
3
Editing Song Settings
This section describes how to alter settings that affect the entire song, such as tempo, song name, etc.
G
Transposing an entire song
The bass track of an entire song can be transposed in semitone steps. This setting also affects the
bass song track.
In song mode, select the song whose settings you want to change, and press the
1
[EDIT] key.
Use the [ ]/[ ] keys to bring up the indication "KEY" on the display.
2
Transpose value
Use the [L]/[M] keys to set the transpose value.
3
The setting range is -6 - 0 - 6 (semitones).
When the setting is complete, press the [EXIT] key.
4
The setting is updated, and the unit returns to the song mode.
This setting does not affect the MIDI track data.
For information about the MIDI track, see page 91.
G
Setting the quantize value
For recording the song track, the quantize value must be set. In song mode, the [EDIT] key needs to
be pressed first, but otherwise the procedure is the same as when setting the quantize value in
pattern mode. For details, see page 50.
G
Song repeat playback setting
You can set song repeat to on or off, and you can control the repeat range.
In song mode, select the song whose settings you want to change, and press the
1
[EDIT] key.
Use the [ ]/[ ] keys to bring up the indication "REPEAT" on the display.
2
72
Current repeat setting
Use the [L]/[M] keys to specify the number of the measure where repeat playback
3
is to be triggered.
Possible settings are OFF (repeat playback disabled) and 1 - last measure of song. When a
setting of 1 or higher is selected, the song plays up to the specified measure number and then
is automatically repeated.
When the setting is complete, press the [EXIT] key.
4
The setting is updated, and the unit returns to the song mode.
G

Changing the song name

When a song is newly created, the name "SONG xxx" (where xxx is the song number) is
automatically assigned.
In song mode, select the song whose name you want to change, and press the
1
[EDIT] key.
Use the [ ]/[ ] keys to call up "NAME" on the display.
2
The song name is shown under "NAME" with an underline.
Underline
Use the [ ]/[ ] keys to move the underline, and use the [L]/[M] keys or the
3
[VALUE] dial to select the desired character. (For a list of usable characters, see
page 36.)
When the song name has been changed, press the [EXIT] key.
4
The unit returns to the song mode.
73