Zoom RhythmTrak RT-323 Operation Manual page 42

Table of Contents

Advertisement

Application Guide [Remote Control]
This section describes how to use the [CONTROL IN] jack in conjunction with an optional foot
pedal or foot switch, to perform remote control of the RT-323.
Controlling the RT-323 With a Foot Pedal (FP01/FP02)
When you connect the separately available foot pedal (FP01/FP02) to one of the [CONTROL IN]
jacks on the RT-323, you can use the FP01/FP02 instead of the JAM slider to adjust parameters
such as pitch or sound change of the currently operated pad.
Connect the FP01/FP02 to the [CONTROL IN] jack on the rear panel.
1
For information on connections, see page 6.
You can connect the FP01/FP02 to the [CONTROL IN 1] or the [CONTROL IN 2] jack. The
two jacks have the same function.
Press the [UTILITY] key, and use the [ ]/[ ] keys to bring up the indication
2
"CTRLIN" on the display.
Operate the FP01/FP02.
3
The RT-323 detects the FP01/FP02, and the parameter that is controlled by the foot pedal is
shown on the display.
FP01
Use the [JAM FUNCTION] key to select the parameter to be controlled with the
4
pedal.
The available settings are "PITCH", "VOLUME", "PAN" (panning), and "SOUND
CHANGE" (pad sound switching).
82
Number of [CONTROL IN] jack where
FP01/FP02 is connected
Assigned parameter
Press the [PATTERN] key to return to pattern mode.
5
Operate the FP01/FP02 while hitting the pad.
6
The effect of moving the pedal is the same as when operating the JAM slider.
Controlling the RT-323 With a Foot Switch (FS01)
When you connect the separately available foot switch (FS01) to one of the the [CONTROL IN]
jacks on the RT-323, you can control a specific pad with the foot switch or control start/stop of
song and pattern playback.
Connect the FS01 to the [CONTROL IN] jack on the rear panel.
1
For information on connections, see page 6.
You can connect the FS01 to the [CONTROL IN 1] or the [CONTROL IN 2] jack. The two
jacks have the same function.
Press the [UTILITY] key, and use the [ ]/[ ] keys to bring up the indication
2
"CTRLIN" on the display.
Push the FS01.
3
FS01
FS01
Function assigned
The RT-323 detects the FS01, and the parameter that is controlled by the foot pedal is shown
on the display.
FP01
Number of [CONTROL IN] jack
where FS01 is connected
to FS01
83

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents