Troubleshooting - Zoom RhythmTrak RT-323 Operation Manual

1: A precount of 1 measure is carried out before recording starts (default setting).
2: A precount of 2 measures is carried out before recording starts.
PAD: Precount is off. Recording starts immediately when a pad is hit.
To terminate the setting and return to pattern mode, press the [PATTERN] key.
3
Other Special Functions
G
Checking the memory free amount
You can check the remaining memory capacity of the RT-323.
Press the [UTILITY] key, and use the [ ]/[ ] keys to bring up the indication
1
"MEMORY" on the display.
The current amount of free memory in the RT-323 is shown. This display is for information
only, it cannot be changed.
To return to the pattern/song mode, press the [PATTERN]/[SONG] key.
2
G
Returning the unit to the factory default settings
This section shows how to initialize the RT-323. This will return all data and settings to the factory
default condition.
Hold down the [G REC] key while turning power to the RT-323 on.
1
The following indication appears on the display, and initialization is carried out automatically.
When initialization is performed, the RT-323 will restart.
Use this function with care. Initialization will clear all user pattern and song information
that you have created.
94
Remaining memory

Troubleshooting

Check the following items first if there seems to be a problem with the RT-323.
I
Power does not come on
• Check that the correct AC adapter or batteries are used.
I
No sound or very low volume
• Is RT-323 connected correctly to playback system?
• Is volume of RT-323 set to a suitable position?
I
No sound or very low volume when hitting pad
• Press the [UTILITY] key to call up the "SENS" item and try changing the setting to an option other
than "SOFT" or "EX HARD".
I
The indication "FULL" appears and no user pattern/song can be recorded
• There is not enough free memory in the RT-323. Delete unneeded user patterns or songs.
I
Song/pattern playback does not start when [
• Press the [UTILITY] key to call up the "SYNC" item, and verify that the setting is "INT".
I
JAM slider has no effect
• In song mode, operating the JAM slider has no effect. Switch to pattern mode or groove play mode.
I
No MIDI data supplied from [MIDI OUT] jack
• Press the [UTILITY] key to call up the "MIDI TR" item, and verify that the setting is "NO OUT".
• Press the [UTILITY] key to call up the items "CTRL" and "PRG", and verify that the setting is
"ON".
I
FP01/FS01 has no effect
• The FP01/FS01 function may not be correctly assigned. To assign a function, be sure to push down
the FS01 (or operate the FP01).
I
Data cannot be stored on SmartMedia card
• SmartMedia card is not formatted. Before a new card can be used, it must be formatted in the RT-
323 ( ¡ p. 74).
• If the indication "NOCARD" is shown, the SmartMedia card is not recognized. Verify that the card
is correctly inserted in the [DATA CARD] slot.
• If the indication "WRITE PROTECT" is shown, the SmartMedia card is write-protected. Remove
the write-protect tab or use another card.
• If the indication "CARD FULL" is shown, the SmartMedia card does not have enough free space.
Delete unneeded files ( ¡ p. 78) or use another card.
] key is pressed
95