Zoom RhythmTrak RT-323 Operation Manual page 17

While moving the JAM slider, hit the pad.
3
The sound selected in step 2 changes.
When you change the function of the JAM slider, the parameter that was controlled so far
reverts to the original value.
Adjusting the Pad Sensitivity
This setting controls the degree to which the value changes depending on the intensity with which
the pad is hit.
Press the [UTILITY] key, and use the [ ]/[ ] keys to call up the indication "SENS"
1
on the display.
Use the [L]/[M] keys or the [VALUE] dial to select the sensitivity from one of the
2
following options.
• SOFT: Low volume regardless of pad hitting intensity
• MEDIUM: Medium volume regardless of pad hitting intensity
• LOUD: High volume regardless of pad hitting intensity
• LITE: Highest sensitivity setting. Results in loud volume even when pad is hit only
lightly.
• NORMAL: Medium sensitivity setting (default)
• HARD: Low sensitivity setting
• EX HARD: Lowest sensitivity setting. Pads must be hit hard to produce volume.
To return to pattern mode, press the [PATTERN] key.
3
32
or
Application Guide [Drum Kits/Bass Programs]
The RT-323 comprises 128 drum kits and 55 bass programs. This section describes the operation
steps to control these functions.
Drum Kit Operation
G
Switching drum kits
RT-323 incorporates 64 read-only preset drum kits (00 - 63) and 64 rewritable user drum kits (64 -
127). For each pattern, you can select the desired drum kit for the drum A track and drum B track.
In pattern mode, press the [DRUM A] key (or [DRUM B] key).
1
While you press the [DRUM A] (or [DRUM B]) key, the display shows the currently selected
drum kit number.
Drum kit name
The top part of the display shows "PRESET" when a preset drum kit is selected and "USER"
when a user drum kit is selected.
While holding down the [DRUM A] key (for selecting the drum A track drum kit) or
2
[DRUM B] key (for selecting the drum B track drum kit), press the [L]/[M] keys or
the [VALUE] dial.
With each push of the [L]/[M] keys, the drum kit number is switched up or down by one
increment.
Hit the pads to check out the sound of the changed drum kit.
3
G
Editing pad settings
In a user drum kit, you can change the parameters for each pad, including drum sound, volume,
pitch, and output target.
The preset drum kits cannot be edited. To edit a preset drum kit, copy the contents to a
user drum kit and then perform editing ( ¡ p. 37).
In pattern mode, press the [DRUM A] key (or [DRUM B] key) and then the [KIT] key.
1
Drum kit
number
33