Sensor Specifications - Fluke 810 User Manual

Electromagnetic Compatibility
International ........................................................ IEC 61326-1: Portable; CISPR 11: Group 1, Class A
Group 1: Equipment has intentionally generated and/or uses conductively-coupled radio frequency energy that is necessary for
the internal function of the equipment itself.
Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a low-voltage
power supply network that supplies buildings used for domestic purposes.
FCC ..................................................................... 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103.
Korea (KCC) ........................................................ Class A Equipment (Industrial Broadcasting & Communication Equipment)
Class A: Equipment meets requirements for industrial electromagnetic wave equipment and the seller or user should take notice of
it. This equipment is intended for use in business environments and not to be used in homes.
Recommended Calibration Interval ..................... 2 years

Sensor Specifications

Sensor Type ........................................................... Accelerometer
Sensitivity, ±5 %, 25 °C ......................................... 100 mV/g
Acceleration Range ............................................... 80 g peak
Amplitude Nonlinearity ......................................... 1 %
Frequency Response
Z, ±3 dB ............................................................... 2 - 7,000 Hz
X, Y, ±3 dB .......................................................... 2 - 5,000 Hz
Power Requirement (IEPE) ................................... 18-30 VDC, 2-10 mA
Bias Output Voltage .............................................. 12 VDC
Grounding .............................................................. Case grounded
Sensing Element Design ...................................... PZT ceramic / shear
Specifications

Sensor Specifications

2-5
2