Fiery EX12 Getting Started Manual page 98

5. With the device name (DC12) selected in the Devices list, click OK.
6. With the device name (DC12) selected in the list of Available Servers, click Select to
Fiery nickname, protocol used,
and device name (DC12)
T
O MODIFY THE CONFIGURATION
1. To edit information for a Fiery in the list of available servers, select the Fiery by its
2. To add a new Fiery to the list of available servers, click Add. Configure the Add New
3. To remove a Fiery from the list of available servers, select the Fiery by its nickname
78 Installing User Software on a Mac OS Computer
The Fiery appears in the list of available servers. The first line of the entry displays the
nickname you gave the server, followed by the protocol. The second line displays the
device name.
begin using ColorWise Pro Tools.
Modifying the configuration
You should edit the configuration whenever there is any change in your original
configuration, such as a change of IP address. First change the specific Fiery Setup
information before configuring the connection.
:
nickname and click Modify. Edit information in the Modify Server Settings dialog box
as necessary, and click OK when finished.
Server dialog box, as outlined in steps 3 through 5 in the previous procedure.
and click Remove.