Fiery EX12 Getting Started Manual page 54

34 Installing User Software on a Windows Computer
2. Click Add Port.
The available port types are displayed.
3. Select LPR Port and click New Port.
If the LPR port is not listed, install the TCP/IP network protocol and Microsoft
TCP/IP printing software. See the Configuration Guide or your Windows NT 4.0
documentation.
4. Enter the IP address of the Fiery.
If your network uses Domain Name Services (DNS), enter the DNS name assigned to
the Fiery instead of the IP address.
5. Press Tab and type one of the following names, depending on the Fiery connection you
want to print to.
print
hold
This name is case-sensitive; type it exactly as shown above.
N :
OTE