Fiery EX12 Getting Started Manual page 65

T
O CONFIGURE THE CONNECTION TO
1. Launch Fiery Link by double-clicking its icon or by choosing it from the
2. Click OK.
Fiery name, device name
(DC12), and IP address
45 Using the software for the first time
For information on using Fiery Link, see the Printing Guide.
Fiery Link is supported only over TCP/IP.
N :
OTE
Start>Programs>Fiery menu.
The Warning dialog box "No Fierys configured, please select a Fiery" appears.
The Edit My Fiery List dialog box opens, and all servers found in the local subnet
appear in the Available Fierys area of the dialog box. If the Fiery is located on a
different subnet, an Error dialog box appears. Click OK to dismiss the dialog box and
perform an Advanced IP search (page 49) or Advanced Subnet search (page 53) to
locate the Fiery.
Only servers that support Fiery Link appear in the Available Fierys area.
N :
OTE
F
IERY SERVERS IN A LOCAL SUBNET
: