Fiery EX12 Getting Started Manual page 79

5. With the device name (DC12) selected in the Devices list, click OK.
Fiery nickname, protocol used,
and device name (DC12)
6. With the device name (DC12) selected in the list of Available servers, click OK to
T
O MODIFY THE CONFIGURATION
1. To edit information for a Fiery in the list of available servers, select the Fiery by its
2. Edit information in the Modify Server Settings dialog box, as necessary, and click OK
3. To add a new Fiery to the list of available servers, click Add. Configure the Add New
4. To remove a Fiery, select the Fiery by its nickname and click Remove.
59 Using the software for the first time
The Fiery appears in the list of available servers. The first line of the entry displays the
nickname you gave the server, followed by the protocol you chose. The second line
displays the device name.
begin using the software.
Modifying the configuration
You should edit the configuration whenever there is any change to your Fiery server or
network, such as a Server Name or IP Address. First change the specific Fiery Setup
information before configuring the connection.
:
nickname and click Modify.
when finished.
Server dialog box as outlined in steps 3 through 5 in the previous procedure.