6. With the device name (DC12) selected, click OK.
7. Click OK in the Configure dialog box.
Fiery name and device name
(DC12)
8. With the Fiery selected in the list of available servers, click OK to begin using
81 Installing Fiery software and fonts
The Fiery appears in a list of configured servers.
The Fiery appears in a list of available servers.
Fiery Spooler.
Modifying the configuration
You should edit the configuration whenever there is any change to your Fiery or
network, such as an IP Address or device change. First change the specific Fiery Setup
information before configuring the connection.