Fiery EX12 Getting Started Manual page 53

33 Setting up PostScript and/or PCL printing with Windows NT 4.0
Completing the Windows NT 4.0 TCP/IP and LPR connection
Once you have installed the PostScript or PCL printer driver and printer driver files,
complete the setup for the TCP/IP and lpr connection as follows:
• Prepare the Fiery to accept print jobs using TCP/IP and lpr protocols
(For details, see the Configuration Guide.)
• Configure the workstation for the TCP/IP connection
Before you continue, ask the system administrator for the IP address assigned to the
Fiery, as well as the subnet mask and gateway address, if they are used.
The TCP/IP Protocol and Microsoft TCP/IP Printing software should already be
installed on the Windows NT workstation.
T TCP/IP LPR W NT 4.0:
O SET UP AND PRINTING FOR INDOWS
1. Open the Properties dialog box for the Fiery EX12/X12 Color Server PS or EX12/X12
Color Server PCL, and click the Ports tab.