Fiery EX12 Getting Started Manual page 97

77 Installing Fiery software and fonts
2. If you have previously configured a connection to the Fiery, you are ready to use
ColorWise Pro Tools. If you have not configured a connection, click Add.
3. Enter the appropriate information for the Fiery.
—Enter a name for the Fiery. This can be any name you wish; it does not
Nickname
have to match the actual server name of the Fiery.
The nickname cannot contain any of the following seven characters:
N :
OTE
[ ] _ " ' <space> <tab>
—Choose the type of network protocol you are using from the pop-up menu.
Protocol
ColorWise Pro Tools is supported only with TCP/IP, so no selection is necessary.
—Enter the IP Address (or DNS or hosts name) of the Fiery.
Server Name
—Enter the name of the device the Fiery is connected to:
New Device
name appears in the Printer Setup section of the Configuration page.
4. When you have added all the information, click Add.
. This device
DC12