Installing Filters - ActionTec Wireless–Ready DSL Gateway User Manual

17. When the next window appears, confirm the Power and Internet Lights on
the Gateway glow steadily green. This may take up to 30 seconds. Click Next.
☞
Note: If the Powerand Internet Lights on the Gateway are not
solid green, check all connections to the Gateway. If all connec-
tions are plugged in properly, call your DSL service provider.
The Gateway is connected to a computer via USB. Next, install the phone filters as
described in "Installing Filters," below.

Installing Filters

Filters allow the use of the phone while online. All phones and other devices
(answering machines, fax machines, etc.) using the same line (i.e., using the same
phone number) as the DSL line must have a filter installed. To install a filter, follow
these instructions:
1. When the following window appears, get the Clear Bag from the DSL Quick
Start Kit and take out the Filters. Click Next to continue.
Chapter 2 Setting Up the Gateway
15