ActionTec Wireless–Ready DSL Gateway User Manual page 48

Actiontec strongly recommends leaving the
Server option is Off, ensure the
the same subnet as the
" Server Configuration."
DHCP
DHCP Server Configuration
Clicking Next in the "
Configuration" screen. Change
Beginning Address - the
IP
starts assigning
factory default setting (192.168.0.2).
Ending Address - the
IP
assigning
IP
ry default settings (192.168.0.254).
The beginning and ending
Gateway. If the default values are left intact, the Gateway supplies a unique IP
address between 192.168.0.2 and 192.168.0.254 to each computer on the net-
work. Note that the first three groups of numbers of the addresses are identical;
this means they are on the same subnet. The
on the same subnet as the
Gateway's address is changed to 10.33.222.1, set the beginning
IP
10.33.222.2, and the ending
(Dynamic or Static) - the type of
DNS
Internet Service Provider (
information, select the type here. If not, leave as is.
Server 1 - the primary
DNS
Service Provider (
tion, enter it here. If not, leave the text box intact.
Chapter 5 Advanced Setup
addresses of the networked computers are on
IP
address of the Gateway. For more information, see
IP
Server" screen generates the "
DHCP
address range and
IP
address at which the
IP
addresses. Actiontec recommends keeping the
IP
Address at which the
IP
addresses. Actiontec recommends keeping the facto-
addresses define the
IP
address range it generates. For instance, if the
IP
address to 10.33.222.254.
IP
. If the
ISP)
server provided by the Internet
DNS
. If the
ISP) ISP
Server option On. If the
DHCP
DHCP
server information here.
DNS
DHCP
Server stops
DHCP
address range of the
IP
address of the Gateway must be
IP
server provided by the
DNS
provided
ISP
provided server informa-
DNS
45
DHCP
Server
server
address to
IP
server
DNS