ActionTec Wireless–Ready DSL Gateway User Manual page 43

Actiontec Wireless-Ready DSL Gateway User Manual
Obtain an IP Address through PPPoE or PPPoA
Select this option to allow the Gateway to use the Point-to-Point over Ethernet
( ) or Point-to-Point over
PPPoE
If a User Name, Password and/or Static IP was entered during Basic Setup, it
should be displayed in the "Broadband Connection via
not, enter the information now. If the information is unavailable, contact the
Internet Service Provider (
Obtain an IP Through DHCP
Select this option (used for cable modem configurations without a Static
assigned by an ) to allow the modem to query the Internet Service Provider (
ISP
and receive address and routing information. Some
IP
their end users with a Host Name and/or Domain Name. If this is the case, check
with the for a host name and domain name and enter them in the "Broadband
ISP
Connection via
DHCP
text boxes blank.
Note: Host and domain name information may also be accessed
from the computer originally connected to the cable modem.
(
ATM PPPoA
.
ISP)
" screen. If the does not require these settings, leave the
ISP
40
) protocol.
PPPoE/PPPoA
s need to authenticate
ISP
" screen. If
IP
ISP)