Advanced Filtering - ActionTec Broadband Router RI408 User Manual

6. Select the protocol that needs to be accessible from the public
clicking in the check box next to "Enable Port Forwarding for Static
selecting a protocol from the drop-down menu. Click Apply, and Apply again.
Repeat these steps to add more static

Advanced Filtering

Advanced filtering is designed to allow comprehensive control over the firewall's
behavior. Specific input and output rules can be defined, the order of logically
similar sets of rules controlled, and distinctions made between rules that apply to
Internet and local network devices.
To access, select Advanced Filtering from any Security screen. The "Advanced
Filtering" screen appears.
Two sets of rules can be configured: input rules and output rules. Each set of rules
comprises three subsets: initial rules, network devices rules, and final rules. These
subsets determine the sequence by which the rules will be applied. Following is a
description of the set ordering for inbound and outbound packets.
Chapter 5 Configuring the Router's Security
addresses from the network.
IP
61
address by
IP
," then
NAT