ActionTec Broadband Router RI408 User Manual page 43

Configuring the WAN PPPoE Connection
Click Settings in the
screen.
WAN PPPoE"
General
The top part of the Configure
tion parameters. Actiontec recommends not changing the default values in this
section unless familiar with networking concepts.
Status Displays the connection status of the
"Disabled," "Connected," etc.)
When should this rule occur? Displays when the rule is active. To schedule rules,
see "Advanced Settings" chapter.
Actiontec Broadband Router User Manual
Properties screen to generate the "Configure
WAN PPPoE
WAN PPPoE
screen displays general communica-
WAN PPPoE
40
connection. ("Down,"