ActionTec Broadband Router RI408 User Manual page 121

Actiontec Broadband Router User Manual
LAN Connection Failure
• Ensure the Router is properly installed, the
and the power is on.
• Confirm the computer and Router are on the same network segment. If
unsure, let the computer get the IP address automatically by initiating the
function, then verify the computer is using an IP address within the
DHCP
default range (
using an address within the range, it will not connect to the Router.
IP
• Ensure the Subnet Mask address is set to
Time out error occurs when entering a URL or IP Address
• Verify all the computers are working properly.
• Ensure the
IP
• Ensure the Router is on and connected properly.
• Verify the Router's settings are the same as the computer.
I've run out of Ethernet ports on my Router. How do I add more computers?
Plugging in an Ethernet hub or switch expands the number of ports on the
Router. Run a standard Ethernet cable from the "Uplink" port of the new hub or
switch to a yellow Ethernet port on the Router.
How do I change the password on the Router's MegaControl Panel?
From the MegaControl Panel Home screen, click Advanced, then Users. From
the "Users" screen, click Administrator, which generates the "User Settings"
screen. In the "General" section of the screen, change the password.
Which connection speeds does the Router support?
The Ethernet Internet connection supports 100 Mbps.
Are the Router's Ethernet ports auto-sensing?
Yes. Either a straight-through or crossover Ethernet cable can be used.
through
192.168.1.2
settings are correct.
connections are correct,
LAN
). If the computer is not
198.168.1.254
255.255.255.0
118
.