Using The 5235 Ip Phone With 5310 Ip Conference Unit; Access The Conference Controller; Turn The Conference Unit On And Off; Adjust The Conference Unit Volume - Mitel 5235 User Manual

USING THE 5235 IP PHONE WITH 5310
IP CONFERENCE UNIT
The 5235 IP Phone uses the 5310 IP Conference Unit for conferencing. You
use the Conference Controller to turn the conference unit off or on, to adjust
the volume or to put the conference unit into Presentation mode. You can
only run one Conference Controller session at a time. If the 5310 Conference
Unit is not connected to the 5235, the Conference Controller application is
not available.

Access the Conference Controller

To access the Conference Controller:
• Open the Application shutter and press the Conference Controller
label, or
• Open the Phone shutter and press the key programmed to the
Conference Controller application.

Turn the conference unit on and off

1. Verify that the conference unit is connected to the 5235 IP Phone.
2. Access the Conference Controller. For more information, see
Conference
3. Press Turn On/Turn Off.
Note: Use the same Touch Screen button to turn your conference unit
on and off. The button presents the appropriate option depending
on the state of your conference unit (Turn Off when the unit has
already been turned on, and vice versa).

Adjust the conference unit volume

• Press Volume Up or Volume Down.
Controller.
-73-
Access