Auto-Answer; Using The Analog Line - Mitel 5235 User Manual

Auto-Answer

When the Auto-Answer feature is active, incoming calls ring briefly, and
then the phone answers the call in Handsfree mode. You can continue the
call handsfree or use the handset.
To enable or disable Auto-Answer:
• Press Auto-Answer key. (See
for instructions on programming features on your phone.) The key
is highlighted and all incoming calls are answered in Handsfree
mode.
To switch from Handsfree mode to handset mode:
1. Lift the handset
2. Press the speaker phone key (
To end a call:
• Press the Cancel phone key (
wait for the caller to hang up.

Using the Analog line

If the 5235 IP Phone is not connected to the 3300 ICP, the phone can
support the Line Interface Module. In this scenario, the Splash screen is
displayed.
Programming Features on Your Keys
).
), press the Hang Up Softkey or
-47-