Checking The Input Signal; Auto Sync Adjustment - Sharp XV-Z10000 Operation Manual

Checking the Input Signal

This function allows you to check the current
input signal information.
Select "Signal Info" in the "Fine Sync"
menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.

Auto Sync Adjustment

Used to automatically adjust a computer image.
Select "Auto Sync" in the "Fine Sync"
menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Note
When setting to " Normal" or
" High Speed":
Auto Sync adjustment will occur when the
projector is turned on or when the inputs
are switched, when connected to a com-
puter.
Manual adjustments should be per-
formed:
When the optimum image cannot be
achieved with Auto Sync adjustment. See
page 53.
Auto Sync adjustment may take some
time to complete, depending on the im-
age of the computer connected to the pro-
jector.
When setting "Auto Sync" to "OFF" or
"High Speed", and if
Sync will be executed in "High Speed"
mode. If the button is pressed again
within one minute, Auto Sync will be ex-
ecuted in "Normal" mode.
is pressed Auto
AUTO SYNC button
Screen display during Auto Sync
-55