Controlling The Projector By A Computer - Sharp XV-Z10000 Operation Manual

Controlling the Projector by a Computer

Controlling the
Projector Using an
RS-232C Cable
When the RS-232C terminal on the projector
is connected to a computer with an RS-232C
cable (null modem, cross type, sold sepa-
rately), the computer can be used to control
the projector and check the status of the pro-
jector. See page 80 for details.
Connect the projector to the com-
puter using an RS-232C cable.
Note
Do not connect or disconnect an RS-232C
cable to or from the computer while it is
on. This may damage your computer.
The RS-232C function may not operate if
your computer terminal is not correctly set
up. Refer to the operation manual of the
computer for details.
Optional RS-232C cable
accessory Type: AN-C10RS (10.0m)
To RS-232C terminal
Desktop computer
RS-232C cable
(sold separately)
-23