Table of Contents
Advertisement
Adjusting the Computer and DVD/DTV Images
Downloaded From projector-manual.com Sharp Manuals
2,3,4
1, 6
5
On-screen Display
2,3
1, 4
On-screen Display
Special Modes Adjustment
Ordinarily, the type of input signal is detected and the
correct resolution mode is automatically selected.
However, for some signals, the optimal resolution mode
in "Special Modes" on the "Fine Sync" menu screen
may need to be selected to match the computer display
mode.
1 Press MENU. The "Picture" menu screen appears.
2 Press
/
to display the "Fine Sync" menu
screen.
3 Press
to select "Special Modes", and then
/
press
.
4 Press
to select the optimal resolution.
/
5 Press ENTER to save the setting.
6 To exit the menu screen, press MENU.
• Avoid displaying computer patterns which repeat every other line
(horizontal stripes). (Flickering may occur, making the image hard
to see.)
• When inputting DTV 1080
I
signal, select the corresponding type
of signal in step 4 above.
• When inputting 720P RGB signal, select the corresponding type
of signal in step 4 above.
Checking the Input Signal
This function allows you to check the current input signal
information.
1 Press MENU. The "Picture" menu screen appears.
2 Press
/
to display the "Fine Sync" menu
screen.
3 Press
/
to select "Signal Info" to display the
current input signal.
4 To exit the menu screen, press MENU.
-34
Advertisement
Table of Contents
