Connecting The Projector To Other Devices; Before Connecting; Connecting The Power Cord - Sharp XV-Z10000 Operation Manual

Connecting the Projector to Other Devices

Before Connecting

Note
Before connecting, be sure to turn off both the projector and the devices to be connected. After making all
connections, turn on the projector and then the other devices.
When connecting a computer, be sure that it is the last device to be turned on after all the connections are
made.
Be sure to read the operation manuals of the devices to be connected before making connections.
This projector can be connected to:
Video equipment:
I A VCR, Laser disc player or other video equipment (See page 17.)
I A DVD player or DTV* decoder (See page 18.)
*DTV is the umbrella term used to describe the new digital television system in the United States.
A computer using:
I DVI to 15-Pin D-sub adapter (See page 21.)
I A DVI cable (See page 22.)
I An RS-232C cable (AN-C10RS) (See page 23.)
Connecting the Power
Cord
Plug in the supplied power cord into
the AC socket on the rear of the pro-
jector.
-16 -16
Supplied
accessory
Power cord