Fisher-Price POWER WHEELS 74340 Owner's Manual & Assembly Instructions page 15

20
Seat Back Tabs
2
Slot
• With the seat at an angle, insert the tabs on the front
edge of the seat into the slots in the foot-well wall
• Push down firmly on the edge of the seat above each
tab to snap the tabs into the slots
• Rotate the back of the seat down
back tabs into the slots in the vehicle body. Push down
firmly on the seat back.
21
• Insert a #8 x 1" screw into the rear of seat as shown.
• Tighten the screw with a Phillips screwdriver. Do not
over-tighten.
Seat
Tabs
PUSH
HERE
1
.
to snap the seat
#8 x 1" Screw
Assembly
22
. • Position the sport bar on its side so that the sport bar
ends curve away from you.
• Position the canopy opposite the sport bar with the
netting facing away from you.
• Slide the four canopy sleeves onto the sport bar.
23
• Extend the canopy completely around the sport bar.
15
Canopy Sleeves
Canopy
Sport Bar
Sport Bar
Canopy
Canopy
Sleeves