Fisher-Price POWER WHEELS 74340 Owner's Manual & Assembly Instructions page 11

4
Dash
Key Assembly
• Bend the end of the phone cord so that it forms a "T".
• Insert the end of the phone cord through the square
opening in the dash pocket. Pull gently on the cord to
make sure it is secure in the dash.
• Place the phone in the dash pocket.
• Snap the key assembly into the dash.
5
22
12
4
2 25
Dash View
Proper label application will help to keep the labels
looking their best! When applying labels, keep the
following guidelines in mind:
• Wash your hands before applying the labels.
• Before applying the labels, wipe the surface of the
vehicle with a clean, dry cloth to remove any dust or oils.
• Place the labels exactly as shown in the illustrations.
• For best results, avoid repositioning a label once it has
been applied to the vehicle.
• After applying a label, rub the label firmly with a
clean, dry cloth to make sure the label is adhered
to your vehicle. Start at the center of a label, and
smooth towards the outer edges to remove
air bubbles.
Phone Cord
Pocket
3
7
26
8
Assembly
6
Steering
Column
T-End
• Wipe the steering column with a paper towel to remove
any excess lubricant.
• Turn the vehicle body on its side.
• Insert the straight end of the steering column up
through the hole in the vehicle body wall and out
through the hole in the dash.
7
15
Cap Nut
• Insert the end of the steering column through the hole in
the steering rod.
• Fit a cap nut onto the end of the steering column.
• While supporting the steering column, tap the cap nut
with a hammer to secure it on the steering column.
Helpful Hint! You may want the help of another person
to support the steering column while you tap the cap nut
with the hammer.
11
Hole
Bottom View
End of Steering Column
Steering Rod
Bottom View