Integrated Machine Control Panel - Siemens Sinumerik 810T User Manual

2 Operation
2.1.1 SINUMERIK 810T operator interface with integrated machine control panel

2.1.1.6 Integrated machine control panel

((Foto-Nr. 810T/.......... einmontieren))
View of the integrated machine control panel / SINUMERIK 810 T
Description of the keys
Reset
When you operate the "Reset" key:
• Operation of the current part program is interrupted.
• Diagnostics messages are cleared
(Alarm nos. 100 . . . . 2999)
• The control is switched to the "RESET" state:
–
–
–
2-16
the NC remains synchronized with the machine
all buffer and working memories are cleared (the part program
memory remains unchanged)
the control is in the reset condition and ready for a new program
start.
© Siemens AG 1990 All Rights Reserved
11.90
6ZB5 410-0EP02
SINUMERIK 810T, GA3 (BN)