Fisher-Price BARBIE JEEP B2489 Owner's Manual & Assembly Instructions page 16

24
Hood
Slot
• Position the hood over the front of the vehicle body
as shown.
• Insert the tabs on the hood into the slots in the
vehicle body.
• Close the hood.
25
• Fit the winch against the brush guard.
• Insert two #10 x 1" screws through the winch and into
the brush guard.
• Tighten the screws with a Phillips screwdriver. Do not
over-tighten.
Assembly
Tabs
Brush Guard
Winch
26
Slot
• Fit and hold the brush guard assembly against the
front bumper.
• Insert two #10 x 1" screws through the front of the brush
guard assembly and into the front bumper.
• Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
27
Grille
• Fit two spacers between the grille and the
back of the brush guard assembly, as shown.
• Insert two #8 x 4" screws through the brush
guard assembly, the spacers and into the
holes in the grille.
• Tighten the screws with a Phillips screwdriver.
16
Do not over-tighten.
Front Bumper
Brush Guard Assembly
Spacers
Brush Guard
Assembly