Fisher-Price BARBIE JEEP B2489 Owner's Manual & Assembly Instructions page 15

20
• Fit the steering wheel cap into the center of the
steering wheel.
• Insert two #8 x 1" screws, as shown.
• Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
21
Wide Tab
Wide
Notch
Lens Guard
• Fit the wide notch in the side of a headlight lens under
the wide tab on a lens guard.
• Press firmly on the inside of the headlight lens to snap it
into the lens guard.
• Repeat this procedure to assemble the other headlight
lens to the remaining lens guard.
Assembly
Steering Wheel
Steering
Wheel Cap
Lens
22
Slot
Tab
• Fit the lens tabs on the back of a lens assembly into the
headlight slots in the grille.
• Press firmly to snap the lens assembly into the grille.
• Repeat this procedure to snap the other lens assembly
into the grille.
23
Hood
Latch
Hole
• Insert a hood latch into one of the slots in the vehicle
body, near the hood area.
• Twist the base of the hood latch
the vehicle body.
• Repeat this procedure on the other side of the hood
area to attach the other hood latch to the vehicle body.
15
Grille
Slot
Hood
Latch
1 / turn to secure it in
4
Tab
Slot