Table of Contents
Advertisement
How to Operate Your Vehicle
Advanced Use - High Speed Drive
Lock-Out Screw
• Before you disconnect the high speed lock-out, make
sure your child knows how to steer, how to start and
stop the vehicle and knows the rules for safe driving.
When the high speed lock-out is disconnected, the
vehicle can be driven forward in low speed (2
maximum) or high speed (5 mph, maximum).
• Make sure the shifter is in the reverse
• Loosen the screw in the shifter box using a Phillips
screwdriver.
• Remove the screw.
• Insert the lock-out screw into the hole in the shifter
handle to keep it for future use. It can be re-inserted into
the shifter box to lock-out high speed.
IMPORTANT! To avoid damaging the motors and gears,
stop the vehicle before shifting between low and
high speed.
• Make sure the shifter is in the high speed
• Press down on the foot pedal
forward at a maximum of 5 mph
• Help your child practice steering to learn how far and how
quickly to turn the steering wheel when driving forward in
high speed.
• Make sure your child is comfortable with steering the
vehicle and automatically knows how to stop.
• Stopping in high speed is the same as stopping in low
speed. The vehicle automatically stops when your
child's foot is lifted from the pedal.
Shifter
Storage
Position
Lock-Out
Position
1
/
mph,
2
position.
position
. The vehicle goes
.
L
Sounds and Lights
• Press any of the buttons on the sound unit for sounds
and lights.
M
• Check all screws, cap nuts and protective coverings
regularly and tighten as required. Check plastic parts on
a regular basis for cracks or broken pieces.
• During snowy or rainy weather, the vehicle should be
stored inside or under a protective cover. Remember to
charge the battery at least once per month while your
vehicle is not in regular use.
• Avoid operating the vehicle in wet or snowy conditions
and do not spray the vehicle with a hose. Do not wash
the vehicle with soap and water. Water or moisture in the
motors or electrical switches can cause them to corrode
and could cause switch or motor failure.
• Avoid operating the vehicle on sand, loose dirt or gravel.
Sand, loose dirt or gravel in the motors or electrical
switches can cause them to jam and could cause switch
.
or motor failure.
• The vehicle can be wiped down with a soft, dry cloth. For
a shiny finish, you can wipe plastic parts with a non-wax
furniture polish applied to a soft-cloth. Do not use
automotive wax. Do not use soap and water or spray
the vehicle with a hose.
• Remove the water jug from the vehicle before storing.
• To ensure that your vehicle stays in good operating order,
we recommend that you periodically have your vehicle
checked by a Power Wheels
See page 31 for the list of authorized service centers or
call 1-800-348-0751 for the location of the authorized
26
service center nearest you.
Sounds and Light Unit
Buttons
Caring
For Your Vehicle
authorized service center.
®
Hide quick links:
Advertisement
Table of Contents
