Table of Contents
Advertisement
Product features may vary from the picture above.
Please read this manual and save it with your original sales receipt.
Tools needed for assembly: Phillips Screwdriver, Hammer, Pliers
and Safety Scissors (tools not included).
Use only with a Power Wheels
®
12 Volt Lead-Acid Rechargeable Battery and Power Wheels
®
12 Volt Charger with Type "12V" Connector (all included).
Sound and Light Unit requires three "AA" (LR6) alkaline batteries (not included) for operation.
JEEP and the Jeep grille design are registered trademarks of DaimlerChrysler
Corporation and are used under license. ©DaimlerChrysler Corporation 2002.
www.powerwheels.com
Goodyear (and winged foot design) and Wrangler (for tires) are trademarks of
The Goodyear Tire & Rubber Company, used with permission.
Owner's Manual
with Assembly Instructions
For Model B2489
Advertisement
Table of Contents
Related Manuals for Fisher-Price BARBIE JEEP B2489
Summary of Contents for Fisher-Price BARBIE JEEP B2489
- Page 1 Product features may vary from the picture above. Please read this manual and save it with your original sales receipt. Tools needed for assembly: Phillips Screwdriver, Hammer, Pliers and Safety Scissors (tools not included). Use only with a Power Wheels ®...
-
Page 2: Table Of Contents
- only two (2) riders at a time. • Use this vehicle ONLY outdoors. Most interior floor- ing can be damaged by riding this vehicle indoors. Fisher-Price will not be responsible for damage to ® the floor if the vehicle is used indoors. -
Page 3: Warnings And Cautions
ELECTRICAL HAZARD • Battery can fall out and injure a child if vehicle tips over. Always use battery clamp. • PREVENT FIRE - Never modify the electrical system. Alterations could cause a fire resulting in serious injury and could also ruin the electrical system. - Use of the wrong type battery or charger could cause a fire or explosion resulting in serious injury. -
Page 4: Parts
• If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this product to the store. • Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded. - Page 5 Parts Rear Bumper Winch Battery Clamp Unit Taillight Housing Set 12 Volt Charger 12 Volt Battery Taillight Lens Set Spacer - 2 Steering Column Steering Wheel Headlight Lens - 2 Light Cover – 2 Lens Guard - 2 Long Seat Belt Strap Steering Gas Cap Wheel Cap...
- Page 6 Parts Key Assembly Wire Clip - 2 Hood Latch – 2 #8 x 4" Screw – 2 #10 x " Screw – 11 #8 x 1" Screw – 9 #10 x 1" Screw – 9 #8 - 32 x 1.625" Screw – 2 .354 Cap Nut –...
-
Page 7: Parts Diagram
Note: Some parts shown are assembled on both sides of the vehicle. No. Part Quantity No. Part Vehicle Body (with Water Jug and Holder) Steering Column .354 Cap Nut Hood Latch 12 Volt Battery Battery Clamp Unit 12 Volt Charger Taillight Lens Taillight Housing #8 x 1"... -
Page 8: Battery Charging
ELECTRICAL HAZARD WARNING • Battery can fall out and injure a child if vehicle tips over. Always use battery clamp. • PREVENT FIRE - Never modify the electrical system. Alterations could cause a fire resulting in serious injury and could also ruin the electrical system. -
Page 9: Battery Charging
Important Notes • Your new battery must be charged for at least 18 hours before you use it in your vehicle for the first time. • You do not need to remove the battery from your vehicle to recharge it. •... -
Page 10: Assembly
WARNING Children can be harmed by small parts, sharp edges and sharp points in the vehicle’s unassembled state, or by electrical items. Care should be taken in unpacking and assembly of the vehicle. Children should not handle parts, including the battery, or help in assembly of the vehicle. - Page 11 Battery Compartment Door Battery Compartment 1.5V x 3 “AA” (LR6) SHOWN ACTUAL SIZE • Insert three “AA” (LR6) alkaline batteries, as indicated inside the battery compartment. • To replace the battery compartment door, fit the tab on the door into the slot in the unit and lower to close. Tighten the screw with a Phillips screwdriver.
- Page 12 Battery Clamp Unit Grooves IMPORTANT! The battery clamp unit must be assembled to the dash before assembling the dash to the vehicle body. • Fit the battery clamp unit into the dash so that the clamp fits into the grooves in the dash. Make sure the battery clamp unit is flush against the surface of the dash.
- Page 13 Wire Clip • Fit the light wire into the wire clip. Sound and Light Unit Light Wire Wire Connector Connector • Plug the sound and light unit connector into the light wire connector. Push firmly to make sure the connectors are completely joined.
- Page 14 Labels - Dash View Proper label application will help to keep the labels looking their best! When applying labels, keep the following guidelines in mind: • Wash your hands before applying the labels. • Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils.
- Page 15 Steering Wheel • Fit the steering wheel cap into the center of the steering wheel. • Insert two #8 x 1" screws, as shown. • Tighten the screws with a Phillips screwdriver. Do not over-tighten. Wide Tab Wide Notch Lens Guard •...
- Page 16 Hood Tabs Slot • Position the hood over the front of the vehicle body as shown. • Insert the tabs on the hood into the slots in the vehicle body. • Close the hood. Winch • Fit the winch against the brush guard. •...
- Page 17 Short Seat T-Loop (Pull through slot) Belt Strap T-Loops Slot Seat • Turn the seat upside down. • Insert the fastener end of a short seat belt strap through the slot near the outer edge of the seat. Make sure the side of the seat belt with the fastener faces the outer edge of the seat.
- Page 18 • Fit a sport bar support to one side of the sport bar. • Insert a #8-32 x 1.625 " screw through the sport bar support, the sport bar and out through the sport bar support. • Fit a lock nut to the end of the screw. •...
- Page 19 Tabs Rear Bumper Lower Rail • Turn the vehicle upright. Face the rear of the vehicle. • Fit the lower rail on the rear bumper over the rear bumper supports. • Gently bend the tabs at the bottom of the rear bumper under the vehicle.
-
Page 20: Label Decoration
Proper label application will help to keep the labels looking their best! When applying labels, keep the following guidelines in mind: • Wash your hands before applying the labels. • Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils. •... - Page 21 Label Decoration 26 (On top of 2) 27 (On top of 7) Right Side View 25 (On top of 1) (Both sides) Left Side View...
-
Page 22: Battery Installation
IMPORTANT! Use only a Power Wheels Use of any other battery will damage your vehicle. Make sure that you charge the battery for at least 18 hours using the enclosed Power Wheels ® 12 volt charger before operating your vehicle for the first time. Charge the battery for at least 14 hours after each use of the vehicle. -
Page 23: Battery Care And Disposal
Care If a battery leak develops, avoid contact with the leaking acid and place the damaged battery in a plastic bag. Please refer to the information on this page for proper disposal. If acid comes in contact with skin or eyes, flush with cool water for at least 15 minutes and call a physician. -
Page 24: Rules For Safe Driving
RIDING HAZARD WARNING Prevent Injuries and Deaths • Direct Adult Supervision Required. • Keep Children Within Safe Riding Areas These areas must be: - away from swimming pools and other bodies of water to prevent drownings. - generally level to prevent tipovers. - away from steps, driveways, cars, roads and alleys. -
Page 25: How To Operate Your Vehicle
Beginner Use - Low Speed Drive As assembled, your vehicle is ready to roll in low speed mph, maximum). It has been pre-set so it will only operate in low speed. After your child has mastered the basic skills of driving and understands the rules for safe driving, it’s time to remove the high speed lock-out screw to allow the vehicle to operate in low or high speed. -
Page 26: Sounds And Light
How to Operate Your Vehicle Advanced Use - High Speed Drive Shifter Lock-Out Screw • Before you disconnect the high speed lock-out, make sure your child knows how to steer, how to start and stop the vehicle and knows the rules for safe driving. When the high speed lock-out is disconnected, the vehicle can be driven forward in low speed (2 maximum) or high speed (5 mph, maximum). -
Page 27: Fcc Statement
FCC Statement (United States Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. -
Page 28: Problems And Solutions Guide
Problems and Solutions Guide IMPORTANT! If you experience a problem with your vehicle, first check the Problems and Solutions Guide below. If you still experience a problem, please contact Power Wheels toll-free at 1-800-348-0751 between 8 AM and 6 PM (EST) Monday through Friday. Or, contact your local Power Wheels Authorized Service Center list beginning on page 31. - Page 29 Problems and Solutions Guide Problem Short run time (Less than Undercharged battery 1 - 3 hours per charge) Overcharged battery Battery is old and will not accept full charge Tripped thermal fuse Vehicle runs sluggishly Undercharged battery Battery needs charging Battery is old and will not accept full charge Vehicle is overloaded...
- Page 30 Problems and Solutions Guide Problem Vehicle runs in low speed, but High speed lock-out not disconnected does not run in high speed Please Note: The vehicle is designed to operate in low speed only in reverse When the foot pedal is pressed Operation of vehicle in low speed only one rear wheel spins Sometimes the vehicle doesn’t...
-
Page 31: Authorized Service Centers
We are continually expanding our Authorized Service Center Network. Please check this listing for the independently owned and operated Authorized Service Center nearest you. If there is not one in your area, please call Power Wheels ALABAMA BIRMINGHAM - Frigid Service & Sales, 701 Graymont Ave. - Page 32 SOUTH BEND (OSCEOLA) - AAA Appliance Service Co., 11868 Lincoln Way West, 46561, (574) 679-4981 TERRE HAUTE - Corey Electronics, 1101 S. 8th Street, 47802, (812) 232-8786, (888) 232-8786 VINCENNES - Organ Battery & Electric Co. Inc., 1434 S. 15th Street, P.O. Box 391, 47591, (812) 822-6474, (877) 882-7172 IOWA BETTENDORF - K &...
- Page 33 COMMACK, L.I. - Turnpike Appliance Service, 6181 Jericho Turnpike, 11725, (631) 499-3355 EAST AURORA - Sem-Fab of Western New York, 150 Elm Street, 14052, (716) 655-5228 ELMIRA - Capabilities, Inc., 1149 Sullivan Street, 14901, (607) 734-2006 HAMBURG - The Battery Post Inc., 4109 St. Francis Drive, 14075, (716) 824-1987 HOWARD BEACH- Crossbay Appliance Service, 158-34 Crossbay Blvd, 11414, (718) 843-4422...
- Page 34 UTAH OREM - The Mending Shed, 1735 South State Street, 84058, (801) 225-8012, (800) 339-9297 SALT LAKE CITY - Appliance Service Center, Inc., 1475 South Main, 84115, (801) 467-6361, (800) 377-8020 WILLARD - Peak Electric Co Inc, 780 N 200 W, 84340, (435) 723-7104 VIRGINIA ALEXANDRIA - D &...
- Page 36 ©2003 Mattel, Inc. All Rights Reserved. ® and ™ are registered trademarks of Mattel Inc. Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052 U.S.A. Fisher-Price, Power Wheels, Power Wheels by Fisher-Price, Power Lock and Power Stick are U.S. trademarks of Mattel, Inc. Printed in Mexico...