Fisher-Price BARBIE JEEP B2489 Owner's Manual & Assembly Instructions page 13

12
Wire Clip
• Fit the light wire into the wire clip.
13
Sound and Light Unit
Wire Connector
• Plug the sound and light unit connector into the light wire
connector. Push firmly to make sure the connectors are
completely joined.
Assembly
Light Wire
Light Wire
Connector
14
Battery Clamp
1
• Position the dash on the vehicle body.
• Make sure the motor connector is through the groove in
the dash.
• Insert a #10 x 1 / " screw through each of the two corner
2
dash tabs nearest to the passenger compartment
• Insert a #10 x 1" screw through the two dash tabs
nearest to the battery compartment
• Insert a #10 x 1" screw into the hole in the center of the
dash, near the battery retainer clip
• Tighten the screws with a Phillips screwdriver. Do not
over-tighten.
15
Dash
• Insert and "snap" the key assembly into the opening in
the dash, as shown.
13
Connector
Battery
Compartment
2
.
.
Key Assembly
Dash
Motor
.