System Programming; Entering System Programming; Default Reset; Programmable System Options - Scytek electronic 2000RS Product Manual

Vehicle security system with remote start

Hide thumbs

Table Of Contents

Table of Contents

Entering System Programming

This system is compatible with both the LCD two way transmitter or the standard transmitter, all system

programming can be performed using either one.

To enter System Programming:

1. Turn the ignition switch to the ON position.

2. Within 5 seconds, press the valet switch 5 times.

· The siren/horn will provide three chirps/honks, indicating that you have entered Programming.

3. Press the valet switch the number times equal to the System Parameter you want to change.

· The siren/horn will chirp/honk each time the valet switch is pressed.

4. Within 5 seconds, press the transmitter button corresponding to the desired operating mode for

that System Parameter.

· The siren/horn will chirp/honk to indicate the setting.

1 chirp/honk

2 chirps/honks

3 chirps/honks

5. When you are finished, turn off the ignition to save the changes.

Default Reset

Following this procedure will set all System Programming Parameters to factory default settings.

1. Enter System Programming.

2. Press Transmitter Button 3.

· The siren/horn will chirp/honk 6 times indicating that the reset signal was received.

· All System Programming parameters are now set to factory default settings.

· The Valet Mode is off.

3. Turn off ignition.

Programmable System Options

The following is a description of the programming options of the system. Some of the program branches

control more than one option, and may require accessing a particular branch number twice in order to

program all desired features.

1. Arm Mode. Selects between Manual and Passive Arming.

2. Auto Rearming Mode. When selected, the system will automatically re-arm 30 seconds after it is

disarmed .

3. Arming Chirps. Selects between normal and silent operation.

4. Ignition Door Locking / Override Code Set. This dual program branch selects Ignition Door

Locking, and programs the optional Emergency Override Code.

Ignition Door Locking. Selects whether or not the system will automatically lock the doors 10 seconds

after the ignition key is turned on.

Override Code Set. Changes the Emergency Override Code for a higher level of security.

Page 32 - Galaxy 5000/2000RS-DBP