Inserting Blank Space (Insert); Shifting The Pitch (Transpose) - Roland PRELUDE MUSIC KEYBOARD 2 Supplementary Manual

Inserting blank space (Insert)

This function inserts blank space at the specified location.
Performance data that follows this location will be moved back
to make room for the inserted blank space. The performance
data will be lengthened by the inserted amount.
1. In the "Style Edit Menu," select "5. Insert" and press
[ENTER].
The STYLE EDIT INSERT screen will appear.
2. Use [ ] [ ] [ ] [
parameter you want to change, and use the VALUE dial to
make the desired setting.
Parameter Value
ADrum, ABass,
PART
Acc1–6, ALL
CHORD Maj, min, 7th
INT1–4,
MAIN–4,
DIVISION
FILL1–4,
END1–4
From
(MEAS: 0001: 01: 000–
BEAT: TICK)
For (MEAS:
0000: 00: 000–
BEAT: TICK)
3. Select "EXECUTE" and then press [ENTER].
It is not possible to restore the data to its original state after
executing this operation.
] to move the cursor to the
Explanation
Selects the Style part into
which blank space is to
be inserted.
Selects the chord.
Selects the division.
Specifies the location at
which the blank space is
to be inserted.
Specifies the length of
the blank space that is to
be inserted.

Shifting the pitch (Transpose)

This function transposes the pitches of the specified region.
1. In the "Style Edit Menu," select "6. Transpose" and press
[ENTER].
The STYLE EDIT TRANSPOSE screen will appear.
2. Use [ ] [ ] [ ] [
parameter you want to change, and use the VALUE dial to
make the desired setting.
Parameter Value
ADrum, ABass,
PART
Acc1–6, ALL
CHORD
Maj, min, 7th
INT1–4,
MAIN1–4,
DIVISION
FILL1–4,
END1–4
From
(MEAS:
0001: 01: 000–
BEAT: TICK)
To (MEAS:
0001: 01: 000–
BEAT: TICK)
Value -127–127
C–(Note Range
Note
Range Min
Max value)
(Note Range Min
Note
Range Max
value)–G9
3. Select "EXECUTE" and then press [ENTER].
It is not possible to restore the data to its original state after
executing this operation.
Creating a new Style
] to move the cursor to the
Explanation
Selects the Style part that
is to be transposed.
Selects the chord.
Selects the division.
Specifies the beginning
of the region to be
transposed.
Specifies the end of the
region to be transposed.
Specifies the number of
semitones by which the
pitches are to be
transposed.
Specifies the lowest pitch
to be transposed.
Specifies the highest
pitch to be transposed.
17