Hold 1 (Controller Number 64); Portamento (Controller Number 65); Sostenuto (Controller Number 66); Soft (Controller Number 67) - Roland F-120R Implementation Manual

MIDI Implementation

❍ Hold 1 (Controller Number 64)

Status 2nd byte
BnH 40H
n = MIDI channel number:
vv = Control value:
* Not received when Rx. HOLD1 = OFF. (Initial value is ON)

❍ Portamento (Controller Number 65)

Status 2nd byte
BnH 41H
n = MIDI channel number:
vv = Control value :
* Not received when Rx. PORTAMENTO = OFF. (Initial value is ON)

❍ Sostenuto (Controller Number 66)

Status 2nd byte
BnH 42H
n = MIDI channel number:
vv = Control value:
* Not received when Rx. SOSTENUTO = OFF. (Initial value is ON)

❍ Soft (Controller Number 67)

Status 2nd byte
BnH 43H
n = MIDI channel number:
vv = Control value:
* Not received when Rx. SOFT = OFF. (Initial value is ON)
* Some Tones will not exhibit any change.
❍ Filter Resonance (Controller Number 71)
Status 2nd byte
BnH 47H
n = MIDI channel number:
vv= Resonance value (relative change):
* Some Tones will not exhibit any change.

❍ Release Time (Controller Number 72)

Status 2nd byte
BnH 48H
n = MIDI channel number:
vv = Release Time value (relative change): 00H-7FH(-64 - 0 - +63),
* Some Tones will not exhibit any change.

❍ Attack Time (Controller Number 73)

Status 2nd byte
BnH 49H
n = MIDI channel number:
vv = Attack time value (relative change):
* Some Tones will not exhibit any change.
2
3rd byte
vvH
0H-FH (ch.1-ch.16)
00H-7FH (0-127)
3rd byte
vvH
0H-FH (ch.1-ch.16)
00H-7FH (0-127)
0-63 = OFF, 64-127 = ON
3rd byte
vvH
0H-FH (ch.1-ch.16)
00H-7FH (0-127)
0-63 = OFF, 64-127 = ON
3rd byte
vvH
0H-FH (ch.1-ch.16)
00H-7FH (0-127)
3rd byte
vvH
0H-FH (ch.1-ch.16)
00H-7FH(-64 - 0 - +63),
Initial value = 40H (no change)
3rd byte
vvH
0H-FH (ch.1-ch.16)
Initial value = 40H (no change)
3rd byte
vvH
0H-FH (ch.1-ch.16)
00H-7FH(-64 - 0 - +63),
Initial value=40H (no change)

❍ Cutoff (Controller Number 74)

Status 2nd byte
BnH 4AH
n = MIDI channel number:
vv = Cutoff value (relative change):
* Some Tones will not exhibit any change.

❍ Decay Time (Controller Number 75)

Status 2nd byte
BnH 4BH
n = MIDI channel number:
vv = Decay Time value (relative change):
* Some Tones will not exhibit any change.

❍ Vibrato Rate (Controller Number 76)

Status 2nd byte
BnH 4CH
n = MIDI channel number:
vv = Vibrato Rate value (relative change): 00H-7FH(-64 - 0 - +63),
* Some Tones will not exhibit any change.

❍ Vibrato Depth (Controller Number 77)

Status 2nd byte
BnH 4DH
n = MIDI channel number:
vv = Vibrato Depth Value (relative change): 00H-7FH(-64 - 0 - +63),
* Some Tones will not exhibit any change.

❍ Vibrato Delay (Controller Number 78)

Status 2nd byte
BnH 4EH
n = MIDI channel number:
vv = Vibrato Delay value (relative change): 00H-7FH(-64 - 0 - +63),
* Some Tones will not exhibit any change.
3rd byte
vvH
0H-FH (ch.1-ch.16)
00H-7FH(-64 - 0 - +63),
Initial value = 40H (no change)
3rd byte
vvH
0H-FH (ch.1-ch.16)
00H-7FH(-64 - 0 - +63),
Initial value = 40H (no change)
3rd byte
vvH
0H-FH (ch.1-ch.16)
Initial value = 40H (no change)
3rd byte
vvH
0H-FH (ch.1-ch.16)
Initial Value = 40H (no change)
3rd byte
vvH
0H-FH (ch.1-ch.16)
Initial value=40H (no change)