020A: Flanger  Delay; 020B: Chorus  Flanger - Roland F-120R Implementation Manual

●020a: Flanger  Delay
This eff ect connects a fl anger and a delay in series.
No Parameter Value
Flanger Pre
1 0–125
Delay
Flanger Rate
2 0–1
Mode
3 Flanger Rate 1–127
4 Flanger Rate 0–21
Flanger
5 0–127
Depth
Flanger
6 0–98
Feedback
Flanger
7 0–100
Balance #1
Delay Time
8 0–1
Mode
9 Delay Time 0–127
10 Delay Time 0–21
Delay
11 49–89
Feedback
Delay HF
12 0–17
Damp
Delay
13 0–100
Balance #2
14 Level 0–127
●020b: Chorus  Flanger
This eff ect connects a chorus and a fl anger in series.
No Parameter Value
Chorus Pre
1 0–125
Delay
Chorus Rate
2 0–1
Mode
3 Chorus Rate 1–127
4 Chorus Rate 0–21
Chorus
5 0–127
Depth
Chorus
6 0–100
Balance #1
Flanger Pre
7 0–125
Delay
Description
Adjusts the delay time from
when the direct sound begins
0.0–100.0 ms
until the fl anger sound is
heard.
When this is set to "note, " the
Hz, note eff ect is synchronized with the
tempo.
0.05–10.00
Frequency of modulation (Hz)
Hz
Frequency of modulation
note
(note)
0–127 Depth of modulation
Adjusts the proportion of the
fl anger sound that is fed back
-98–+98%
into the eff ect. Negative (-)
settings will invert the phase.
Volume balance between
D100:0W–
the direct sound (D) and the
D0:100W
fl anger sound (W)
When this is set to "note, " the
ms, note eff ect is synchronized with the
tempo.
Adjusts the delay time from
1–2540 ms the direct sound until the
delay sound is heard. (ms)
Adjusts the delay time from
note the direct sound until the
delay sound is heard. (note)
Adjusts the proportion of the
0–+80% delay sound that is fed back
into the eff ect.
Adjusts the frequency above
which sound fed back to
200–8000 Hz, the eff ect will be cut. If you
Bypass do not want to cut the high
frequencies, set this parameter
to Bypass.
Adjusts the volume balance
between the sound that is
D100:0W–
sent through the delay (W)
D0:100W
and the sound that is not sent
through the delay (D).
0–127 Output Level
Description
Adjusts the delay time from
0.0–100.0 ms the direct sound until the
chorus sound is heard.
When this is set to "note, " the
Hz, note eff ect is synchronized with the
tempo.
0.05–10.00 Modulation frequency of the
Hz chorus eff ect (Hz)
Modulation frequency of the
note
chorus eff ect (note)
Modulation depth of the
0–127
chorus eff ect
Volume balance between
D100:0W–
the direct sound (D) and the
D0:100W
chorus sound (W)
Adjusts the delay time from
when the direct sound begins
0.0–100.0 ms
until the fl anger sound is
heard.
No Parameter Value
Flanger Rate
8 0–1 Hz, note
Mode
0.05–10.00
9 Flanger Rate 1–127
Hz
10 Flanger Rate 0–21 note
Flanger
11 0–127 0–127
Depth
Flanger
12 0–98 -98–+98%
Feedback
Flanger D100:0W–
13 0–100
Balance #2 D0:100W
14 Level 0–127 0–127
MIDI Implementation
Description
When this is set to "note, " the
eff ect is synchronized with the
tempo.
Modulation frequency of the
fl anger eff ect (Hz)
Modulation frequency of the
fl anger eff ect (note)
Modulation depth of the
fl anger eff ect
Adjusts the proportion of the
fl anger sound that is fed back
into the eff ect. Negative (-)
settings will invert the phase.
Adjusts the volume balance
between the sound that is
sent through the fl anger (W)
and the sound that is not sent
through the fl anger (D).
Output Level
33