0156: Gate Reverb; 0200: Overdrive  Chorus; 0201: Overdrive  Flanger; 0202: Overdrive  Delay - Roland F-120R Implementation Manual

●0156: Gate Reverb
This is a special type of reverb in which the reverberant sound is cut off before its
natural length.
No Parameter Value
1 Type #1 0–3
2 Pre Delay 0–125
3 Gate Time 0–99
4 Low Gain 0–30
5 High Gain 0–30
6 Balance #2 0–100
7 Level 0–127
●0200: Overdrive  Chorus
This eff ect connects an overdrive and a chorus in series.
No Parameter Value
Overdrive
1 0–127
Drive
Overdrive
2 0–127
Pan
Chorus Pre
3 0–125
Delay
Chorus Rate
4 0–1
Mode
Chorus Rate
5 1–127
#1
6 Chorus Rate 0–21
Chorus
7 0–127
Depth
Chorus
8 0–100
Balance #2
9 Level 0–127
●0201: Overdrive  Flanger
This eff ect connects an overdrive and a fl anger in series.
No Parameter Value
Overdrive
1 0–127
Drive
Overdrive
2 0–127
Pan
Flanger Pre
3 0–125
Delay
Flanger Rate
4 0–1
Mode
Flanger Rate
5 1–127
#1
Description
Type of reverb
Normal: conventional gated
Normal, reverb
Reverse, Reverse: backwards reverb
Sweep1, Sweep1: the reverberant
Sweep2 sound moves from right to left
Sweep2: the reverberant
sound moves from left to right
Adjusts the delay time from
0.0–100.0 ms the direct sound until the
reverb sound is heard.
Adjusts the time from when
5–500 ms the reverb is heard until it
disappears.
-15–+15 dB Gain of the low range
-15–+15 dB Gain of the high range
Volume balance between
D100:0W–
the direct sound (D) and the
D0:100W
reverb sound (W)
0–127 Output Level
Description
Degree of distortion
0–127
Also changes the volume.
Stereo location of the
L64–63R
overdrive sound
Adjusts the delay time from
0.0–100.0 ms the direct sound until the
chorus sound is heard.
When this is set to "note, " the
Hz, note eff ect is synchronized with the
tempo.
0.05–10.00
Frequency of modulation (Hz)
Hz
Frequency of modulation
note
(note)
0–127 Depth of modulation
Adjusts the volume balance
between the sound that is
D100:0W–
sent through the chorus (W)
D0:100W
and the sound that is not sent
through the chorus (D).
0–127 Output Level
Description
Degree of distortion
0–127
Also changes the volume.
Stereo location of the
L64–63R
overdrive sound
Adjusts the delay time from
when the direct sound begins
0.0–100.0 ms
until the fl anger sound is
heard.
When this is set to "note, " the
Hz, note eff ect is synchronized with the
tempo.
0.05–10.00
Frequency of modulation (Hz)
Hz
No Parameter Value
6 Flanger Rate 0–21
Flanger
7 0–127
Depth
Flanger
8 0–98
Feedback
Flanger
9 0–100
Balance #2
10 Level 0–127
●0202: Overdrive  Delay
This eff ect connects an overdrive and a delay in series.
No Parameter Value
Overdrive
1 0–127
Drive #1
Overdrive
2 0–127
Pan
3 Delay Mode 0–1
4 Delay Time 0–127
5 Delay Time 0–21
Delay
6 49–89
Feedback
Delay HF
7 0–17
Damp
Delay
8 0–100
Balance #2
9 Level 0–127
●0203: Distortion  Chorus
The parameters are essentially the same as in "Overdrive  Chorus, " with the
exception of the following two.
Overdrive Drive  Distortion Drive
Overdrive Pan  Distortion Pan
●0204: Distortion  Flanger
The parameters are essentially the same as in "Overdrive  Flanger, " with the
exception of the following two.
Overdrive Drive  Distortion Drive
Overdrive Pan  Distortion Pan
●0205: Distortion  Delay
The parameters are essentially the same as in "Overdrive  Delay, " with the exception
of the following two.
Overdrive Drive  Distortion Drive
Overdrive Pan  Distortion Pan
MIDI Implementation
Description
Frequency of modulation
note
(note)
0–127 Depth of modulation
Adjusts the proportion of the
fl anger sound that is fed back
-98–+98%
into the eff ect. Negative (-)
settings will invert the phase.
Adjusts the volume balance
between the sound that is
D100:0W–
sent through the fl anger (W)
D0:100W
and the sound that is not sent
through the fl anger (D).
0–127 Output Level
Description
Degree of distortion
0–127
Also changes the volume.
Stereo location of the
L64–63R
overdrive sound
When this is set to "note, " the
ms, note eff ect is synchronized with the
tempo.
Adjusts the delay time from
1–2540 ms the direct sound until the
delay sound is heard. (ms)
Adjusts the delay time from
note the direct sound until the
delay sound is heard. (note)
Adjusts the proportion of the
0–+80% delay sound that is fed back
into the eff ect.
Adjusts the frequency above
which sound fed back to
200–8000 Hz, the eff ect will be cut. If you
Bypass do not want to cut the high
frequencies, set this parameter
to Bypass.
Adjusts the volume balance
between the sound that is
D100:0W–
sent through the delay (W)
D0:100W
and the sound that is not sent
through the delay (D).
0–127 Output Level
31