Table of Contents
Advertisement
Recording Your Performance
Recording Your Keyboard Performance
It's easy to record your own performances.
You can play back a recorded performance to check your playing, or perform along with a recorded performance.
Getting ready to record
fig.Panel
1.
Press the [Song] (Tempo) button a number of times.
The [Song] (Tempo) button will light red, and the display will indicate "Internal Song."
2.
Press the [-] button a number of times.
The display will indicate "New Song."
3.
Select the tone that you want to use for performing (p. 21).
If desired, sound the metronome (p. 22).
4.
Press the [
] button.
The [
] button will light, the [
If you decide not to record, press the [
Starting/stopping recording
fig.Panel
1.
Press the [
A two-measure count will be heard (the measure number will be shown as "-2" then "-1" in the lower right of the display),
and then recording will start.
When recording starts, the [
A count sound will not sound if you initiated recording by playing the keyboard.
2.
Press the [
Recording will stop.
2
] button will blink, and the LX-10F will enter recording-standby mode.
] button once again.
] button or play the keyboard.
] button and [
] button will light.
] button.
1
4
41
Advertisement
Table of Contents
